Quick Summary
The NUPROL Power 11.1V LiPo 3000mAh 3S Deans Nunchuck Battery is an airsoft battery with a split nunchuck format and a Deans (T) connector. It is listed with 20C/40C discharge figures and 60A/120A continuous and burst values, so it is important to match the battery to the requirements of the replica you plan to use it with.
The nunchuck layout is intended for battery spaces that suit a split pack, including some rear-wired and front-wired airsoft replicas. Check the battery compartment dimensions and connector type before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | NUPROL Power. |
| Battery type | LiPo battery. |
| Voltage | 11.1V. |
| Capacity | 3000mAh. |
| Cell count | 3S. |
| Connector | Deans (T) connector. |
| Format | Nunchuck split battery format for battery spaces that suit a divided pack. |
| Discharge figures | 20C/40C, with 60A continuous and 120A burst values listed. |
What to Compare Before Buying
- Connector: This battery uses a Deans (T) connector. Check that your replica uses the same connector or that you already have the correct adapter.
- Battery space: The nunchuck format is meant for split battery compartments. Compare the battery shape with the space in your replica before choosing an offer.
- Voltage and cell count: The battery is 11.1V and 3S. Make sure that matches the battery requirement for your replica.
- Discharge requirement: The listed continuous and burst values are relevant to the replica’s electrical needs. Check the owner’s manual if a minimum discharge rate is specified.
What Else You May Need
A LiPo balance charger is required for charging this type of battery. A fire-retardant safe-charging bag is also listed as the recommended charging storage method.
Using It in Practice
The split nunchuck layout is intended to help the battery fit into smaller compartments, such as some buttstock, buffer tube, handguard or front-wired spaces on airsoft replicas. The main practical check is whether the shape, connector and battery bay all match the replica you plan to use it with.
Before You Decide
Confirm the Deans (T) connector, the 11.1V 3S battery specification and the nunchuck split format before choosing an offer. If your replica needs a different connector, a different battery shape or a different discharge requirement, this is not the right match.










