Quick Summary
The Seaflo 06 Series 750 GPH Automatic Bilge Pump is an automatic bilge pump with an all-in-one pump and switch design. It turns on when the water level rises and shuts off when water is removed, with no float switch required.
The stated features also include an anti-fouling impeller, run dry capability, saltwater safe use, quiet operation and an industry standard mounting pattern. A 2 year warranty is also mentioned in the product material.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | Seaflo. |
| Series | 06 Series. |
| Pump rating | 750 GPH. Check this against the amount of water you want the pump to move. |
| Operation | Automatic bilge pump with an all-in-one pump and switch design. |
| Switch type | No float switch required. |
| Activation level | Activate at 50 mm. |
| Deactivation level | Deactivate at 20 mm. |
| Mounting pattern | Industry standard mounting pattern. |
| Warranty | 2 year warranty is mentioned. |
What to Compare Before Buying
- Pumping rate: This model is rated at 750 GPH. Compare that against the amount of water your bilge setup needs to move.
- Automatic operation: It switches on as the water level rises and off when water is removed. Check that this automatic behaviour matches your installation plan.
- Mounting pattern: The stated industry standard mounting pattern matters if you are replacing an existing pump or planning a fixed installation.
- Operating conditions: The pump is described as saltwater safe and run dry capable. Compare those points with the environment it will be used in.
- Contents and fit: Confirm the exact selected version and any installation requirements before choosing an offer.
Compatibility, Size and Fit
The key fit check is the industry standard mounting pattern. If you are replacing an existing bilge pump, compare the mounting pattern and installation space with your current setup before buying.
The 50 mm activation point and 20 mm deactivation point are also important if your installation has space restrictions or a set water-level trigger requirement.
Before You Decide
Confirm the 750 GPH rating, the industry standard mounting pattern and the 50 mm activation point against your setup. The automatic pump and switch design, with no float switch required, should also suit the way you want the bilge system to operate.
Check the Electrical and Hose Fit
Before choosing a pump, check its required electrical supply and discharge connection dimensions against your boat’s wiring and hose. A matching mounting pattern does not by itself confirm electrical or hose compatibility. The stated 750 GPH rating also does not confirm the flow an installed setup will deliver, so check that the pump and installation suit your requirements. Follow the instructions for the exact pump when planning its installation.









