Quick Summary
The 01 Series SEAFLO 20A max Bilge Pump Float Switch is a float switch for a bilge pump. It is stated as suitable for use with 12V DC, 24V and 32V DC bilge pumps, with a 20A max rating.
The switch turns pumps on when the water level reaches 2.0″ (51 mm). That makes the trigger point an important check if you are matching it to a specific pump setup.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Bilge pump float switch for water-level activation. |
| Series | 01 Series, which helps distinguish this version from other SEAFLO variants. |
| Maximum current | 20A max, so the connected pump setup should stay within that stated limit. |
| Voltage suitability | Suitable for 12V DC, 24V and 32V DC bilge pumps. |
| Activation level | Turns pumps on when water reaches 2.0″ (51 mm). |
| Warranty | 2 year warranty is stated in the product information. |
What to Compare Before Buying
- Voltage: Check that your bilge pump system matches the stated 12V DC, 24V or 32V DC suitability.
- Current rating: Compare the 20A max figure with the electrical load of your pump setup.
- Trigger level: The switch activates at 2.0″ (51 mm), so confirm that water-level point suits your installation.
- Product variant: The 01 Series designation helps confirm you are choosing the intended version.
Before You Decide
Confirm the 01 Series version, the 20A max rating and the 12V DC, 24V or 32V DC suitability before choosing an offer. If the water-level trigger point matters in your installation, check the stated 2.0″ (51 mm) activation level as well.
Installation Checks
Before fitting, check that the switch’s physical dimensions and mounting arrangement suit the available bilge space. Plan the wiring and mounting in line with the instructions for the exact switch, and ensure the arrangement does not obstruct the pump.









