Quick Summary
This is a float switch for an automatic bilge pump system, designed to start and stop a DC pump based on water level. It is described as suitable for 12V, 24V and 32V systems, with a stated 1 m wire and compact white housing.
The switch is aimed at water-level control for a bilge pump setup, so the key buying checks are voltage, current rating, size and how the wiring will fit your installation.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Automatic bilge pump float switch for water-level control. |
| Voltage | Stated for 12V, 24V and 32V systems. Check that your pump matches the intended voltage. |
| Current rating | 12V/20A, 24V/10A and 32V/7A are stated. Match the rating to the pump setup. |
| Wire length | 1 m wiring is stated, which affects how far the switch can be positioned from the connection point. |
| Dimensions | 13 x 4.4 x 5.1 cm. Compare this with the space available near the pump. |
| Colour | White housing. |
What to Compare Before Buying
- Voltage: Check that the pump system is set up for 12V, 24V or 32V as required.
- Current rating: Compare the stated amperage with the electrical load of the pump circuit.
- Space: The 13 x 4.4 x 5.1 cm size should suit the available mounting area.
- Wiring reach: The stated 1 m wire needs to suit the planned position and cable route.
Compatibility, Size and Fit
This float switch is intended for bilge pump control on DC systems. The main fit checks are the supply voltage, current rating and the physical space around the pump installation. If the circuit or mounting area differs from the stated values, a different version may be needed.
What Is Included
The product is described as including 1 auto switch.
Before You Decide
Confirm the pump voltage, current rating, mounting space and wiring route before choosing an offer. If your setup needs different electrical limits or a longer cable run, compare another version instead.
Control Switch, Not Pump
The float switch controls a bilge pump; it does not move water itself. Before installation, use the instructions for the exact switch and pump to confirm the connection method and electrical limits. Matching the stated voltage and current figures alone does not confirm that the circuit connections are suitable.









