Quick Summary
This is a green bungee dock and anchor line 2 pack for boats and similar watercraft use. It is described as stretching from 4 to 5.3 ft and as reducing pull on cleats, docks, pylons and anchors. The product is also presented as a shock-absorbing dock line with loops and tensioners for quicker tying than a conventional rope setup.
The listing also refers to PE outer construction, an elastic cord inside, PE braided rope outside and triple stitching at the connecting part. A tensile strength of 2200 lbs is stated. Two foam pieces are mentioned as protection for contact areas, and the foam design is described as floating if it falls into the water.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Bungee dock and anchor line for marine tie-up use. |
| Colour | Green. |
| Pack quantity | 2 pieces. Check this matches the quantity you need. |
| Length | Stretches from 4 to 5.3 ft. Compare this range with your docking or anchoring setup. |
| Tensile strength | 2200 lbs is stated. Confirm that this meets your required load expectations for the exact use. |
| Construction | PE outer shell, elastic cord inside and PE braided rope outside are described. |
| Protection | Foam pieces are mentioned for contact protection, and the foam is described as floating. |
| Connection style | Loops and tensioners are described for quicker attachment. |
What to Compare Before Buying
- Length: The stated stretch range is 4 to 5.3 ft, so compare it with the distance and movement you need to allow.
- Quantity: This pack contains 2 pieces, which matters if you need one line or a matched pair.
- Strength: A tensile strength of 2200 lbs is stated, so check that figure against your own requirements for the exact setup.
- Connection method: Loops and tensioners are described, so make sure that style suits your cleats, docks, pylons or anchor points.
- Protection: Foam pieces are mentioned, which may matter if you want added cushioning at contact points.
What Else You May Need
You will still need a suitable cleat, dock, pylon or anchor point to connect the line to. Check that the chosen fixing point matches the attachment style before buying.
Before You Decide
Confirm the 2 pack quantity, the 4 to 5.3 ft stretch range and the stated 2200 lbs tensile strength before choosing an offer. If the connection style matters, make sure the loops and tensioners suit your boat or docking point.
Using It in Practice
This type of line is set up around the fastening point, then tightened to help manage movement between the boat and the dock or anchor point. The stated elastic section is intended to add give, while the foam pieces are described as protecting contact areas.
Understanding the Strength Figure
For any mooring line, distinguish a tensile or breaking-strength figure from a stated working-load limit. Check the applicable working-load guidance and whether it suits the expected conditions and attachment points; a strength figure alone does not establish safe use.











