Quick Summary
The PATIKIL 2-piece stove pipe elbow is a stainless steel 90 degree connector for use with 60 mm chimney pipe. Each piece measures 215 mm long, and the product is intended for joining compatible pipes where a bend is needed.
The silver tone finish and turned edges are part of the design, and the larger end is made to assemble with stove pipe of the same diameter. The pack quantity is 2, so this is a pair of elbows rather than a single fitting.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | PATIKIL. |
| Product type | 90 degree stove pipe elbow for chimney pipe routing. |
| Quantity | 2 pieces, so the pack includes a pair of elbows. |
| Material | Stainless steel. |
| Colour | Silver tone. |
| Length | 215 mm, which affects how much space the pipe bend will take up. |
| Small head outer diameter | 60 mm. |
| Big head diameter | 60 mm ID / 65 mm OD. |
| Angle | 90 degrees. |
What to Compare Before Buying
- Pipe diameter: This elbow is made around 60 mm chimney pipe. Check the diameter of the pipe you want to connect before choosing an offer.
- Pack quantity: The pack contains 2 elbows. Compare that with the number of bends you need in your setup.
- Space available: The 215 mm length and 90 degree bend affect how the pipe route will sit in the available space.
- Use with matching parts: The enlarged end is designed to assemble with stove pipe of the same diameter, so the fit needs to match the rest of the pipe run.
Compatibility, Size and Fit
This fitting is made for 60 mm stove pipe and uses a 90 degree bend. It is described as suitable for hot tents, hammock tents and RVs, and it can also be used for indoor drainage and water heater exhaust pipe. Because fit depends on the pipe size, confirm the diameter of the chimney pipe before ordering.
The enlarged end is intended to connect with stove pipe of the same diameter. If your pipe run uses a different diameter, a different fitting will be needed.
Before You Decide
Confirm that your pipe diameter is 60 mm and that a 2-piece elbow pack is the right quantity for your setup. Check the 215 mm length against the space available, and make sure the 90 degree bend matches the route you need to create.
Follow the manufacturer’s instructions for installation and use, especially where the pipe is part of a stove or exhaust setup.
