Quick Summary
The HG PLVTII is a 150mm flexible ducting hose in silver, supplied at 1.5 m length. It is described as a 5-layer aluminium foil duct with PET layers and a spiral steel wire structure, intended for ventilation and air exhaust applications.
The main buying checks are the 150mm size, the 1.5 m length, and whether the selected setup needs the included clamps or other fittings to connect securely.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Flexible ducting / vent hose for ventilation and air exhaust use. |
| Size | 150mm ducting, so the opening size matters for fit. |
| Length | 1.5 m, which affects how far the duct can reach between connection points. |
| Construction | 5-layer aluminium foil design with 2 PET layers and 3 aluminium foil layers. |
| Reinforcement | Spiral steel wire helps the duct hold its shape. |
| Colour | Silver. |
| Included items | 2 stainless steel clamps are mentioned for securing the connection. |
| Temperature range | Working temperature range stated as -30°C to 110°C. |
What to Compare Before Buying
- Diameter: This ducting is marked as 150mm, so match the connection size to your fan, vent or appliance outlet.
- Length: At 1.5 m, it suits runs where that reach is enough without over-stretching or leaving excess slack.
- Connection method: Check whether the clamps and the duct opening work with the outlet you plan to use.
- Intended temperature: The stated temperature range matters when the duct is used for warm air extraction.
Compatibility, Size and Fit
The ducting is described as a 150mm fit and also gives an enlarged inner diameter of approx. 158mm and outer diameter of 160mm. That means the exact outlet size and how the duct will sit over it are the key checks before buying.
If the connection point is tight, awkward or already uses a specific fitting, compare the measurements carefully before choosing this hose.
What Is Included
- 1 x flexible ducting hose
- 2 x stainless steel clamps
Important Limitations
This is a consumable ventilation accessory and will wear over time with normal use. It is also a flexible duct rather than a rigid pipe, so it is meant for routed ventilation runs rather than fixed pipework.
Before You Decide
Confirm the 150mm size, the 1.5 m length and the included clamp setup before choosing an offer. If your connection point needs a different diameter, a longer run or a rigid duct, this version will not be the best match.
