Quick Summary
PMP Tubeless Rim Tape is an adhesive rim tape for tubeless ready bikes. The tape is 37.5 mm wide and is described as suitable for rims with an inner width between 35 and 37 mm.
The roll is intended for taping tubeless ready wheels, and the stated fit range makes rim width the key check before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Adhesive rim tape for tubeless ready bikes. |
| Width | 37.5 mm wide, so rim inner width is the main fit check. |
| Compatible rim width | Suitable for rims with inner width between 35 and 37 mm. |
| Use | Intended for taping tubeless ready wheels. |
| Application note | One roll is stated to be enough to fully tape two wheels up to 29" in diameter. |
What to Compare Before Buying
- Rim inner width: This tape is specified for 35 to 37 mm. Match that to the rim you plan to tape.
- Wheel size: One roll is stated to cover two wheels up to 29". Check whether your wheel setup matches that stated coverage.
- Tubeless ready setup: The tape is for tubeless ready wheels, so confirm that is the wheel type you are working with.
What Else You May Need
The tape is part of a tubeless setup, and the description also refers to valve installation after taping. Check that you have the valve and the other parts required for your wheel build before starting.
Setup and Correct Use
The described fitting method is to remove the tyre, position the rim vertically and apply the tape starting around 10 cm before the valve hole. The tape should be laid on without overlaps. After that, a small hole is made at the valve position and the valve is inserted.
For this kind of product, keeping the tape centred and matching the stated rim width matters more than speed of installation.
Before You Decide
Confirm the rim inner width is between 35 and 37 mm, and check whether one roll suits the number and size of wheels you want to tape. If you are building a tubeless setup, make sure the valve and other wheel parts are ready before you start.
A Practical Tubeless Setup Check
Before fitting the tape, clear enough space to remove the tyre and inspect the rim bed properly. A simple pre-fit check is to line up the rim width, the wheel size and the valve position so the job can be done in one session without stopping to recheck the setup.
