Quick Summary
This 7.4 V, 2200 mAh 2S lithium polymer battery is a nunchuck-style pack for compatible airsoft AEGs. It has a Deans (T) connector and stated discharge ratings of 15C continuous and 30C burst.
Check the replica’s connector, battery compartment dimensions and minimum discharge-rate requirement before choosing it. Each of the two battery sections is specified as 122 x 21 x 10 mm.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Battery type | LiPo, or lithium polymer. Use a LiPo balance charger. |
| Voltage and configuration | 7.4 V, 2S. Confirm these suit the replica. |
| Capacity | 2200 mAh. |
| Discharge rating | 15C continuous and 30C burst, stated as 33A and 66A respectively. Check the replica manual for its minimum required C rating. |
| Connector | Deans (T). The replica must use a compatible connector. |
| Layout and dimensions | Nunchuck layout with two sections, each specified as 122 x 21 x 10 mm. Check each section against the available compartment space. |
What to Compare Before Buying
- Discharge requirement: Check the replica manual’s minimum C rating against this battery’s 15C continuous rating.
- Connector: Confirm the replica uses a Deans (T) connector; do not assume a different connector will fit.
- Compartment space: Allow for both 122 x 21 x 10 mm sections and the nunchuck layout. Compare these with the actual battery compartment.
- Electrical specification: Check that 7.4 V and the 2S configuration are suitable for the specific replica.
Compatibility, Size and Fit
The split nunchuck design places the battery in two sections, which may suit compartments arranged around a buttstock or handguard. Fit depends on the replica’s wiring, compartment shape and available space; the layout alone does not establish compatibility. Check that both sections and their wiring can be accommodated without forcing them into place.
Safe Use and Important Precautions
Do not run this LiPo battery flat, as this can affect its ability to hold a charge. Use a LiPo balance charger and charge it in a fire-retardant safe-charging bag. Follow the battery and replica instructions for charging and use.
Before You Decide
Confirm the replica’s required voltage and minimum discharge rating, its Deans (T) connector, and the available space for both battery sections. Check the relevant instructions before charging or using the battery.










