Quick Summary
The LIGHTEU 12V 750GPH Automatic Bilge Water Pump is a compact, fully submersible electric pump with a built-in float switch system. It is described as a 3A pump, and the automatic setup means no separate float switch is needed.
For setup, the wiring note matters: brown and white is the automatic mode wire, while brown is the manual mode wire. If automatic mode is needed, the brown and white wire should be connected to the anode.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | LIGHTEU, the named product brand. |
| Product type | 12V automatic bilge water pump for submersible use. |
| Flow rating | 750GPH, given as about 47.3 litres per minute. |
| Current | 3A, which matters for matching the electrical supply. |
| Switch system | Built-in float switch system, so no separate float switch is needed. |
| Wiring modes | Brown and white wire for automatic mode, brown wire for manual mode. |
| Construction notes | Moisture-tight seals, stainless steel shaft, and high-impact plastic housing are stated features. |
What to Compare Before Buying
- Voltage: This model is 12V, so the power supply needs to match.
- Flow rate: The stated output is 750GPH. Compare that with the pumping task you want it to handle.
- Control mode: Automatic and manual wiring are both mentioned, so check which mode you need before fitting it.
- Installation space: It is described as compact, so confirm the available space in the intended location.
Setup and Correct Use
The pump is described as fully submersible and ignition protected, with anti-airlock design and moisture-tight seals. The wiring note is important during installation: brown and white is used for automatic mode, and brown is used for manual mode.
When fitting any bilge pump, use the correct wiring and follow the manufacturer’s instructions for the exact installation and operating mode.
Before You Decide
Confirm that you need a 12V, 750GPH pump with a built-in float switch system. Check whether automatic or manual wiring is the mode you want, and make sure the electrical supply matches the stated 3A requirement. If space is tight, the compact format is also worth checking before choosing an offer.
Check the Hose Connection
Before choosing, confirm that the pump outlet and the hose diameter are compatible, and that the hose can be routed to the intended discharge point. Check the mounting arrangement against the available bilge space and follow the manufacturer’s instructions for the exact installation.









