Quick Summary
The Pactrade Marine Boat Aerator Livewell Timer is a 12V timer switch for a livewell pump setup. It uses manual and automatic modes, with an adjustable timer range from 2 seconds to 5 minutes and a 30-second timer cycle mentioned in the product details.
It is described as a water-resistant ABS solid-state switch with a 10 amp limit. If you are comparing offers, the main checks are the 12V supply, the 10A load limit, the panel space needed for installation, and the exact operating mode you want.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | Pactrade Marine. Useful for matching the correct product line. |
| Product type | Boat aerator livewell timer switch. Intended for a livewell pump setup. |
| Voltage | 12V. Check this against the system it will be connected to. |
| Load limit | 10 amp. Make sure the connected load stays within the stated limit. |
| Modes | Manual and automatic modes. Compare this with the control style you want. |
| Timer range | Adjustable from 2 seconds to 5 minutes, with a 30-second timer cycle mentioned in the details. |
| Material | Water-resistant ABS solid-state timer. Check that the intended location suits the stated construction. |
| Dimensions | 1-1/4 inches W x 1-3/4 inches H x 4 inches D. Important for panel space planning. |
| Installation clearance | Requires 4 inches clearance behind the panel. |
| Panel fit | Threaded brass shaft fits panels up to 1/2 inch thick. |
What to Compare Before Buying
- Supply voltage: This switch is for 12V use, so the connected system should match that requirement.
- Load limit: The stated limit is 10 amp. Compare that with the load you plan to control.
- Timer control: Check whether you want manual and automatic modes, plus the adjustable timer range.
- Installation space: Allow for the stated body size and the 4 inches of clearance behind the panel.
- Panel thickness: The threaded brass shaft is stated to fit panels up to 1/2 inch thick.
What Else You May Need
An appropriate 12V connection and a panel location with the stated clearance are needed for installation. The included wiring guide is mentioned in the description, so follow it for the wiring arrangement.
Before You Decide
Confirm the 12V setup, the 10A load limit, and the available panel space before choosing this timer switch. Also check whether you want the manual and automatic modes and the stated timer range for your livewell or other 12V load.
Common Buyer Questions
Can it be used for things other than a livewell?
It is described as suitable for any 12V load under 10 amps, including lighting, bilge pumps, ventilation fans, temperature control, automated feeding systems, fish finders and GPS systems.
How much space does it need?
The stated dimensions are 1-1/4 inches W x 1-3/4 inches H x 4 inches D, and it also requires 4 inches clearance behind the panel.
Does it have manual control?
Yes. Manual and automatic modes are both mentioned.
