Quick Summary
The sourcing map 50 Pack M5 x 8 mm 4-Pronged Tee Nuts are zinc plated carbon steel tee nuts with an M5 thread, 0.8 mm pitch and 8 mm height. They are made for fitting into wood and similar sheet materials where a threaded fixing point is needed.
The pack quantity and the stated size make this a straightforward choice for buyers who need the correct thread and fitting dimensions for a project. The 4-pronged design is made to be inserted into a drilled hole and fixed in place from the rear side of the material.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | sourcing map |
| Quantity | 50 pieces, so the pack suits multi-item projects or keeping spares to hand. |
| Thread | M5 thread with 0.8 mm pitch. |
| Height | 8 mm, which matters when checking the space available in the material. |
| Total diameter | 15 mm, useful when planning the drilled opening and surrounding clearance. |
| Base plate thickness | 1.4 mm. |
| Material | Carbon steel with a zinc plated surface. |
What to Compare Before Buying
- Thread size: This model uses M5 with a 0.8 mm pitch. Check that it matches the bolt or machine screw you plan to use.
- Fitting size: The tee nut is 8 mm high and 15 mm across, so compare those dimensions with the thickness and drilled space in your material.
- Pack quantity: The pack contains 50 pieces, which is useful if you need several fixings for one build or repair.
- Application: It is stated for solid wood products, plywood and particleboard, so confirm that your material and fixing method suit this type of nut.
How It Works
The pronged tee nut is inserted into a drilled hole, then the flange is tapped from the opposite side so the claws bite into the wood. That leaves a threaded fixing point ready for the matching M5 fastener.
When fitting, the key check is hole size and alignment. The prongs need enough purchase to seat properly, and the thread should be protected during installation so the fixing remains usable.
Before You Decide
Check the M5 thread, 8 mm height and 15 mm diameter against your project before choosing an offer. Confirm that the material and fixing method suit the woodwork or panel you plan to use it with, and make sure the 50-piece pack matches the quantity you need.
